|
|
| 100 ohm RTD Sensor with Hirschmann Connector |
These rigid sensors have a 0.40” long sensing element at the tip within a stainless steel welded closed end sheath. To achieve the most reliable reading, the minimum immersion depth should be at least 0.80”. They are terminated in a Hirschmann connector, which is comprised of a plug and jack and a gasket in between which makes the sensor IP65 rated.
- 3 wire configuration
- 100 ohm RTD element, Alpha = 0.00385, Class B
- Sheath: 316 Stainless Steel 0.125” or 0.250” OD
- Operating range: -58ºF to +390ºF (-50°C to +200°C)
- IP65 Rated
|
The following types are available:
100 ohm RTD Sensor with Hirschmann Connector
100 ohm RTD Sensor with Hirschmann Connector
|
|
|
|
© 2006- TC Direct, PO Box 685, Hillside, IL 60162, United States
Toll Free: 877 249 1777 Tel: 708 236 5777 Fax: 708 236 5778Email: sales@tcdirect.com
|
|
|
|
Order Code