RTD Sensor with Standard Head and Process Connection
These rigid sensors have a stainless steel welded closed end sheath. The Pt100 sensing element is 10mm long and is placed at the tip of the sheath which means that the minimum immersion depth should be at least 50mm. The sensor is rated up to 660ºF. A standard weatherproof die cast alloy head is incorporated and is ideal where a heavy duty connection with cable is to be made near the sensor. A 1/2” NPT parallel process connection thread is fitted directly below the terminal head for easy mounting of the sensor in to the process.
3 wire configuration
Pt100 element meets IEC 60751 Class B
Sheath: 316 Stainless Steel 0.250” OD
Variety of lengths available. Length shown does not include the head or its gland
Operating range: -100ºF to +660ºF
Terminated in an IP67 standard weatherproof die cast alloy head rated to 275ºF
1/2” NPT process connection thread (length taken from under hex of process thread)
These rigid sensors have a stainless steel welded closed end sheath. The Pt100 sensing element is 10mm long and is placed at the tip of the sheath which means that the minimum immersion depth should be at least 50mm. The sensor is rated up to 660ºF. A standard weatherproof die cast alloy head is incorporated and is ideal where a heavy duty connection with cable is to be made near the sensor. A 1/2” NPT parallel process connection thread is fitted directly below the terminal head for easy mounting of the sensor in to the process.
Order Code